The first thing you need to understand is that compared to some other household maintenance issues, garage door repair is relatively simple. You, or somebody who repairs garage doors for a living, can easily check to see if the problem lies with the garage door itself, or in the door opener. Next, you or your repairman will have to determine whether the problem can be fixed, or if the garage door or opener actually needs to be replaced. So far, pretty simple, right?

The best case scenario in garage door repair is that your door is simply not hanging on its metal tracks correctly. This can be remedied as easy as tightening some loose screws on your mounting brackets. Also, you might need to hammer out a dent on your metal tracks with a rubber mallet. All these kinds of remedies are easy to complete and most of the time, you do not need to call in an expert.

In terms of your garage door opener, things can become a little tricky, especially if the issue lies in the radio receiver or motor. Of course, there may also be a simple fix-it solution to this problem as well. You may simply need to move some devices around so that the radio and motor can “speak” to each other.

However, as with anything, the problem may not be as easy as those outlined above. The metal tracks may be severely dented and beyond repair. There may exist deeper issues with your garage opener than just simply having to move some devices around. Having the basic knowledge of the simple ways to garage door repair, however, can better prepare you for any scenario.

If you liked this article I suggest you visit The Home Living Blog where you can find more about repairing your garage door and many other interesting articles.

• sticking panels
• slow or sluggish over head motors
• springs that break
• clickers that don’t function
• breaking garage door motor chain

If you have experienced one of the issues listed above, there are a few things you can do to accomplish a Wayne Dalton Garage Door Repair. The overhead motor for example does not need to be replaced with a Wayne Dalton garage door motor. Even though the garage door system is considered a luxury garage door, you can swap out the motor with a cheaper motor from your local hardware store such as Home Depot or Lowes. These motors will usually have the same amount of horse power and work just as well than the expensive brands at a third of the price.

If your garage door springs have broken, don’t even try to attempt to fix these yourself. Call your local Wayne Dalton repair service or any garage door repair service. Springs are under extreme tension and are extremely dangerous. Too many people get hurt and even die from each year from accidents arising from adjusting garage door springs. Do yourself a favor and call the professionals who are trained to deal with these dangerous springs.

Garage door chains and tracks are very easy to fix yourself. You can get all of the replacement parts from any local hardware store and repairing them is easy. Just simply swap out the bad parts with the new parts. Hopefully this article has been useful to get you on the right path to fixing your garage door system.

Do you have a Genie garage door system that needs to be repaired? If so, I am pleased to be able to share with you the Genie garage door opener troubleshooting guide. This guide is extremely useful as it shows you how to troubleshoot and perform your own Genie garage door opener repair.

The first thing to do when assessing your garage door system is to look at the system as a whole. What I mean by this is to examine and carry out a quick checklist on the system, looking for things such as the following. Are the springs in working order? Does the garage door opener turn on when you push the wall button? Does the garage door hang up when opening and closing? Does the chain have too much slack or is it too tight? These questions alone can often help you determine the underlying cause of your garage door system problem.

Many Genie garage door systems seem to have problems with their actual overhead motors. They are a bit temperamental at times because they have a safety cover that covers the light bulb. The thing is that when ever this cover is opened or loosened, the garage door opener has a safety mechanism which won’t allow it to run until this cover is closed. Most people sit for hours trying to figure out what is wrong with their garage door when most of the time it is this simple issue. The cover should stay tightly closed, but vibrations, wind in the garage, and other factors seem to pop this little cover loose and cause all sorts of problems for owners.

My best advise on these Genie overhead motor covers is to tape yours down well so it can’t pop loose. This is a very simple fix that works very well, so go grab the duct tape and fix it redneck style. Hopefully this brief article has helped you and will continue to help you with your garage door repairs. Follow this link for more general information about adjusting garage door springs.

Whether you have a flip-out or roller garage door, at some point you will have to repair or entirely replace the springs. Now you’ll have to decide whether you want to fix it yourself or have a licensed contractor do it for you. If you’re comfortable around tools, dangerous equipment, and can follow precise instructions, then it’s probably worth your time to repair the springs yourself and save a good amount of money. However, if you haven’t worked on your garage door or aren’t mechanically inclined, you’ll save yourself a huge headache by hiring a licensed contractor to do it for you.

You’ve probably never heard of garage door springs, or even cared about them, until right now. I know I didn’t have a clue what they were until my garage couldn’t open one morning. All you knew was that when you clicked your garage door remote, the garage opened for you and then closed for you.

You didn’t think about how two springs (or a set of two springs) could lift a 400 lb. plus door, day-in and day-out. Now imagine one of those springs being damaged, and suddenly releasing when they weren’t supposed to; that has “dangerous situation” written all over it. Never, ever try to repair your garage door springs when the door is closed. That is when the springs are stretched and can release a tremendous amount of energy if you attempt to fix them.

If you’ve had your garage for awhile, and have never maintained your garage springs, you’ll probably have to replace them entirely. Your springs are incredibly dangerous because pieces of the old springs can become shrapnel projectiles and can possibly kill anyone in the garage at that time. If this is a scary thought for you, then it’s a good idea to hire a professional. They’ll be able to guarantee the work and make sure the parts are cared for properly.

Adjusting Your Springs

If you’ve maintained your garage door over the years, the first thing you’ll have to do is either tighten or loosen the springs. It’s important that you make the adjustment to the door while it’s neutral so that it doesn’t fly up or drop down while you’re repairing it. Remember, if you don’t feel comfortable doing this yourself, it’s ok to hire a contractor to do it for you.

Installing New Springs

If adjusting your springs doesn’t do the trick, you’ll have to replace them entirely. When you install your new springs, you’ll have to slowly release the tension off of the old springs first. And remember to replace both springs. It will save you from having to this again in the near future when your other spring becomes worn out.

Once you’ve replaced or repaired your garage springs, it’s important that you perform regular maintenance at least twice a year. As with any type of mechanical device that you use regularly, it will eventually wear out. To ensure that it doesn’t wear out to the point of failure, it’s important to conduct regular maintenance checks. It’s also worth bearing these maintenance issues in mind before you next think about buying garage doors. Here also are some additional tips for trouble shooting and fixing Genie garage door systems.

They are also very often one of, if not the, most frequently used entrance doors into your home yet considering fitting a secure garage door somehow seems to be low on most people’s list of priorities (that is, until after they are unfortunate enough to suffer a break in, by which time it’s a bit late).

On a related theme and especially if you use your garage door as the primary entrance to your house you would be well advised to consider insulation in order to help maintain the desired temperature in the house. You can either opt to specify this up front as many garage doors provide the option to fit integral insulation or add it later using a generic garage door insulating kit.

Then there is the balance of cost and quality – if you don’t plan on staying in your property more than a few years and/or don’t use the garage doors much then cheaper or budget garage doors could easily fit the bill (in both senses). However, if your garage doors get a lot of use and you would rather not encounter “garage door repair hell” when the inevitable happens then go for the best you can afford.

So there are a number of things to balance against each other then, but essentially your start point before proceeding further is to decide what exactly you want from your garage and hence also its doors. Is this a temporary makeover or a long term investment? Do you need to consider security? Ability to withstand strong winds and/or extreme temperatures? Once you are clear about the answers to these questions then you will understand how to judge specific criteria.

So what should you look for when considering installing or replacing a garage door?

Garage Door Types

First there is the material type. This falls into three basic categories:

• Metal garage doors are far and away the most common these days accounting for some 80% of the market in America and Canada. They are invariably either steel or aluminium – steel doors being cheaper but heavier. Both should be painted with a specialist outdoor metal paint and are otherwise relatively low-maintenance apart from the inherent problem that flat metal doors tend to dent and buckle easily, which can affect both their look and operation. However, metal doors provide a good platform for adding optional features such as insulation and reinforcement.
• Vinyl and fibre-glass doors have the advantage of being both low in weight and sturdy. Again they can be painted (though some are pre-treated to a specific colour), tend to be more robust where dents and scrapes are concerned and will last for as long as the material holds out against break-down from ultra-violet light. These tend to be occupy the budget section of the market for those who have minimal requirements where their garage doors are concerned.
• Wooden garage doors go back as far as “garages” and have a classic, timeless quality. Wood is a naturally attractive, versatile and easy to maintain material which may be painted or stained to match existing timber features such as entrance doors or window. As with all wood products, the quality varies according to the specific type of wood and whether it is a composite construction (compressed fibres and laminates) or solid wood. Hence the price can also vary quite widely, but as with most things in life, you get what you pay for and most people recognise that wood garage doors are best.

Wood garage doors can be anything up to ten times more expensive than a standard steel door due to the inherent costs of the material, a more involved and precise manufacturing process to assure against warps and cracks, and the simple fact that the additional weight requires the installation of much stronger (and heavier) rails and beams to support the door. This last point also effectively rules out DIY installation where wooden doors are concerned – you absolutely must invest in paying for professional installation.

The types of wood mostly commonly used to make garage doors are conifers such as Redwood, Hemlock and Cedar since these contain a high concentration of oil and thus resist condensation and rot well. It is also not unusual to find Oak used as a material thanks to it high strength and durability (slightly interesting related fact – the English navy established by Henry 8th was built using Oak).

There is however more to consider when choosing a material for your garage doors than simply issues of cost or appearance. For most people the debate usually narrows down to a choice between steel versus wooden garage doors. Sometimes the deciding factor may be out of your hands anyway though, because although wooden doors undoubtedly project an image of quality, can be reinforced to provide a high level of security (discussed later) and have good natural insulation properties, if you happen to live in an area that experiences extremes of weather (wild fluctuations in temperature or very strong winds) then you may have little choice but to opt for a specially strengthened and/or heavily insulated steel door.

Buying A Garage Door

Second you should consider where to source your chosen type of door. As with many major household items, a quality original product installed by competent fitters will ensure years of trouble free enjoyment. Accordingly, you would be well advised to check for references of previous installations and evidence that your supplier has been around a while, has a reputation worth protecting, carries full insurance, employs properly trained/accredited staff and offers reasonable warranties and after-sales support in the event that anything should go awry.

Garage doors can be purchased from large DIY stores, door and window companies and garage door specialists. Bear in mind though that the long term durability and reliable performance of your garage doors will depend crucially on the quality of the installation process as much as the doors themselves. Specialists who fit garage doors day in day out are far more likely to deliver a result that looks good and lasts from day one for many years to come.

Another reason to consider using a garage door specialist is customisation – you can have exactly what you want, in the style and size you specifically want rather than have to compromise to fit in with a standard product.

Garage Door Maintenance

Third, as with any long term purchase you need to consider the likely useful lifespan of your new doors and any maintenance issues. This is not just down to caring for the surface finish on the doors, but also bearing in mind that the mechanism for the garage door opener will need to be kept in good order.

Many people forget that although the door panel itself is the most visible element it is only one part of the overall system – “part” being the operative word. Garage door opening mechanisms use quite a few parts (springs, rollers and so on) that need to all work smoothly together otherwise the door will cease to open and close as it should.

Like many things, a garage door is only as good as its weakest part and if even a quite trivial component should fail then the whole door is compromised. How long any given part will last is measured in “cycles” where one cycle is one opening and closing of the door. Cheaper parts are often rated for 5,000 cycles, which assuming an average of 3 uses of the door per day (or roughly 1,000 cycles per year) effectively limits their life span to about 5 years.

So roughly every 5 years you can expect to call out a garage door repair specialist – or more likely suffer a spate of call outs since it won’t just be one part that has reached the end of its working life. Be aware also that adjusting garage door springs and potentially repairing or replacing door mechanism parts can be both difficult and dangerous and you should check carefully that anyone who comes to repair your doors is properly covered by valid liability and workers compensation insurance.

In the event that anything goes wrong you need to be sure that insurance will cover both damage to property and personal injury, otherwise (it being your property) you could find yourself liable and facing ruinous costs. Also, asking for proof of insurance is a good way to weed out the cowboys since reputable companies will not hesitate to provide this information if asked.

On the other hand, you could insist on parts where testing was discontinued at 80,000 cycles since they just wouldn’t fail and then you can expect quite literally a lifetime of pretty much trouble free operation. Ask your supplier to provide (in writing) the manufacturers’ cycle ratings for the parts that will be installed with your door – this is little different really to asking a car dealer about mileage.

And talking of “lifetime” it is worth understanding what many so-called “Lifetime Warranties” really mean. For example almost all steel garage doors are sold with a “Lifetime” guarantee against rust-through which is where a door rusts so badly that you can actually see through it; but in practice most people cannot stand to look at a rusting door and will paint the door long before the rust totally eats through the metal with the result that no-one in fact ever claims for rust-through. It is a worthless warranty and in reality just a sales ploy to reassure the naive and unwary.

Finally, it might be obvious but do be sure to ask about all aspects of your new garage doors before you buy and if anything doesn’t feel right then look elsewhere till you find a supplier/installer you feel comfortable with. It’s your property and your money after all.

There are pros and cons on both sides, but whichever you type you eventually decide upon, bear in mind that this is a long term decision since both steel and wooden garage doors can last easily a couple of decades or more according to the amount of use or abuse they’re subjected to and how well they are maintained.

Of the two, steel garage doors are more abundantly found in most typical domestic installations, thanks mainly to lower initial purchase cost and wide availability of suppliers, door designs and finishes. On the subject of door finishes, many garage door suppliers offer different warranties according to the selected finish, since some last significantly better than other (as with all things, the decision comes down to higher purchase price versus reduced maintenance costs).

As a rule steel doors are quite a bit lighter than solid wood but are prone to collecting dents and suffering deformities due to twisting and strains imposed by the opener mechanism. As a consequence you are more likely to find your self in need of a competent garage door repair services outfit at some point.

The most commonly found styles for steel garage doors include both raised and flush panel designs and in recent years any number of variations on “carriage style” garage doors, which mimic traditional carriage house doors but in fact are sectioned to roll up vertically. It is not uncommon these days to also find insulation offered as an option for steel garage doors, which not only helps render the garage a more habitable space but provides additional insulation for any walls shared with the house, saving on ongoing heating and/or cooling costs.

After steel, wood is the next most popular material for garage doors. Wood garage doors are on the whole more expensive and whereas a paint finish is optional on other materials, for wood it is mandatory and must be maintained to ensure the doors last properly. The main benefits that wood has over steel are:

• better looking;
• more customisable and hence more versatile;
• better intrinsic insulation properties;
• more robust and able to withstand knocks etc;

The ability to customise wooden garage doors to precisely match existing architectural features is in fact a major attraction for many people.

Wood garage doors, especially solid timber ones, are of course heavier than steel doors. However, there is an alternative that is lightweight, cheaper than solid wood, and environmentally friendly. Composite wood garage doors are manufactured from a tough amalgam of recycled wood and resin that is moulded to shape. The result has many of the benefits of a solid timber door but is considerably lighter – both physically and on the wallet.

Then there are considerations of physical security and insulation i.e. keeping out unwelcome visitors and weather. There is no doubt that “out of the box” wood panelled garage doors win out here; they are inherently more robust, thicker, heavier and provide decent natural insulation. However, if you’re looking for serious garage door security or heavy duty garage door insulation then a steel door might be the better bet.

Because of their basic strength coupled with inherent light weight, there is more scope to add additional reinforcement and insulating panels to a steel door. It also relatively cheap and easy to do as an after thought. This is not to say that you cannot achieve this with a wooden door, just that in general it will be more expensive and you will need to invest in a new wooden door that has already been factory fitted with internal reinforcing steel bolts and insulation.

Routine Information Collection

All web servers track basic information about their visitors. This information includes, but is not limited to, IP addresses, browser details, timestamps and referring pages. None of this information can personally identify specific visitors to this site. The information is tracked for routine administration and maintenance purposes.

Cookies and Web Beacons

Where necessary we use cookies to store information about a visitor’s preferences and history in order to better serve the visitor and/or present the visitor with customized content.

Advertising partners and other third parties may also use cookies, scripts and/or web beacons to track visitors to our site in order to display advertisements and other useful information. Such tracking is done directly by the third parties through their own servers and is subject to their own privacy policies.

Controlling Your Privacy

Note that you can change your browser settings to disable cookies if you have privacy concerns. Disabling cookies for all sites is not recommended as it may interfere with your use of some sites. The best option is to disable or enable cookies on a per-site basis. Consult your browser documentation for instructions on how to block cookies and other tracking mechanisms. This list of web browser privacy management links may also be useful.

Special Note About Google Advertising

Any advertisements served by Google, Inc., and affiliated companies may be controlled using cookies. These cookies allow Google to display ads based on your visits to this site and other sites that use Google advertising services. Learn how to opt out of Google’s cookie usage. As mentioned above, any tracking done by Google through cookies and other mechanisms is subject to Google’s own privacy policies.

Contact Information

If you have any concerns or questions about this privacy policy then please contact us for further clarification.

You are permitted to share the information on this website within the meaning of Fair Use, which this copyright policy declares to be no more than 10% or 400 words, to copy, distribute and display under the following conditions.

Attribution. You must attribute the work in the manner specified by the author (but not in any way that suggests that they endorse you or your use of the work).

Noncommercial. You may not use this work for commercial purposes. Advertisments on a site may imply the site is commercial as advertisments generate income.

No Derivative Works. You may not alter, transform, or build upon this work.

No Published Translations. Published human and machine translations beyond Fair Use are considered a violation of this copyright policy.

Usage With Permission. Any of the above conditions may be waived if you obtain permission from the copyright holder. You may contact the copyright holder via the Contact link shown on this page. For any reuse or distribution of the content with permission, you must make clear to others the license terms of this work. The best way to do this is with a link to the original article.

Feeds: Use of feeds from this site are for personal use, not commercial. Republishing content from this site via feeds is permitted as titles and excerpts, as part of Fair Use, at the discretion of the copyright holder. Scraping, using feeds as a replacement for content, is not permitted under any circumstances without the express permission of the copyright holder. Any use or republishing of full or excerpted content as a replacement for content is not permitted and will be penalized.